Baileigh R-M55 Ring Roller

The R-M55 has been the flagship in the Baileigh Industrial roll bender line since its introduction. It has a 2" Schedule 40 pipe capacity, which is impressive for a manual top shaft two driven roll machine. To achieve this type of capacity, the R-M55 uses a variable speed inverter that is overload protected, this allows the operator to fine tune the rolling speed for each material.

Baileigh PT-22 Plasma Cutter

The PT-22 plasma table is not your normal 2 x 2 plasma cutting table. The PT-22 offers many features not found on the competition at a great price. First off, the PT-22 comes fully assembled, no need to spend hours building hoping to have the alignment correct. A water bath is also part of the package, not an upgrade. Another nice feature of the PT-22 is that is comes with the material cross supports pre cut.

Baileigh SW-623 Hydraulic Iron Worker

The SW-62 ironworker from Baileigh Industrial is the next step in Baileigh Industrial hydraulic ironworkers. It takes the concept of the SW-50 and adds a little more power or capacity. This 62 ton has industry leading features, such as vertical movement for all stations and oversized work tables. The heavy duty, versatile design of the SW-62 iron worker offers 62 tons of true vertical pressure to each of its five integrated stations, making the SW-62 able to power through most any requirement that may arise.

Baileigh PH-19 Power Hammer

Baileigh industrial is making metal forming easier and more available to the masses with the economical PH-19 reciprocating power hammer. The Baileigh Industrial PH-19 power hammer would be a great addition to any shop that has to form metal fast. The PH-19 is considered to be the little brother to the Baileigh Industrial MH-19 multi hammer.

Baileigh AP-5 Arbor Press

The AP-5 arbor press can produce up to 5.6 tons of force. It has a heavy duty frame work that is a machined cast iron housing that uses a thick 2" X 2" case hardened ram. This is the perfect tonnage for any fabrication or machine shop for pressing bearings, bushings, or broaching keyways into items as well.

Baileigh CS-400AV Cold Saw

If you have a shop that cuts a lot of aluminum, then you need a fully automatic cold saw that is made purposely for non-ferrous materials. The CS-400AV from Baileigh Industrial might just be the perfect saw. This automatic cold saw uses a 16” blade that spins at 3200 RPM, higher speeds help prolong blade life when cutting through softer metals such as aluminum or copper.

Baileigh BS-300M Horizontal Band Saw

The BS-300M is the perfect bandsaw for those shops that like the look and operation of an old time American style band saw. It is the perfect cutoff saw for those shops that cut many different shapes and profiles of metal. With its 9-3/4” round capacity at 90 degrees the BS-300M can handle almost anything that you can throw at it.

Baileigh PR-514 Plate Roll

Baileigh Industrial sheet metal equipment has always offered great value in its line of machinery, and the PR-514 plate forming machine is no exception. The PR-514 is the perfect plate roll for small and medium rolling applications.

Baileigh PL-1236E Metal Lathe

The PL-1236E is a great metal lathe for anyone that is looking an economical lathe that is high in quality and features. Like all Baileigh Industrial lathes, the PL-1236E gear head metal lathe has an integrated gear system that allows for taping, turning, and polishing with a range of speeds from 70 to 1400 RPM. The PL-1236E is built to last with only top quality components and all ways are ground and hardened to ensure long life.

Baileigh HSP-66M Hydraulic Press

The HSP-66M is the first in our line of motorized h-frame presses. This heavy duty press is built using only the best quality components and craftsmanship. A fully welded 3/8” plate steel frame will take more than the 66 tons that the industrial grade hydraulic system can throw at it. Weighing is at just over 1500 pounds, you know that this press is made to last.

Baileigh BS-128M Horizontal Band Saw

The BS-128M bandsaw from Baileigh Industrial is perfect for the home shop or hobbyist. But, just because this is an economical saw, doesn’t mean it is short on features. The BS-128M can either be run as a standard horizontal pivot style bandsaw or as a vertical bandsaw, by lifting the head 90 degrees and locking it into that position. This becomes extremely important when trying to do intricate designs and the best part you only need one machine to do it. Hydraulically controlled descent, 60 degree mitering head, bearing blade guides and an easily portable working stand are also part of the package.

Baileigh BS-127P Horizontal Band Saw

The BS-127P from Baileigh Industrial is a high quality portable band saw that will give any shop years of profitability. The BS-127P is 110 volt so it can work in any setting and it’s driven by an inverter that allows the operator to adjust the blade speed from 75 to 246 feet per minute, to achieve the best cut possible, as well as increase blade life.

Baileigh BS-712M Horizontal Band Saw

Have limited space but need a lot of versatility out of your band saw? Take a look at the BS-712M from Baileigh Industrial, this compact band saw can be run in the traditional horizontal position for general cut offs or in a vertical position, by just lifting the bow and locking it in place, for doing precise shape cutting. Powered by 110 volts this do all machine can be used anywhere and include wheels for portability.

Baileigh BS-712MS Horizontal Band Saw

The BS-712MS is one of the most versatile horizontal bandsaws on the market. The design is based off of the BS-712M, but add a heavy duty cast iron swivel head to do its mitering instead of the vise. This feature allows for faster production times and less waste. The BS-712MS horizontal bandsaw is powered by 110 volts, allowing it to be used just about anywhere.

Baileigh BS-210M Horizontal Band Saw

The BS-210M horizontal bandsaw from Baileigh Industrial will be a great performer in your shop and will quickly become one of your favorite tools to use. A good mix of features and benefits plus an outstanding price make this saw a winner. Since it only requires 110V to operate, it can be used anywhere, small to large machine shops or even in the garage at home.

Baileigh BSV-12 Vertical Band Saw

Need a vertical band saw but don’t have much room? Then the BSV-12 from Baileigh Industrial would be the perfect addition to your shop. The BSV-12 is small in footprint but does not skip on features and is built to the same high quality standards as the rest of Baileigh Industrial’s vertical band saw line. The BSV-12 has a fully welded frame and industrial grade components.

Baileigh BS-250M Horizontal Band Saw

The BS-250M horizontal band saw from Baileigh Industrial is a great saw for any fabrication shops that cut a variety of material and profiles. The BS-250M is a inverter driven variable speed band saw that allows the operator to precisely adjust the speed for the proper blade and material, increasing the life of the blade and decreasing expensive blade costs.

Baileigh BS-916M Horizontal Band Saw

The BS-916M horizontal band saw is based off of the BS-300M, but with a little smaller footprint for those shops that have limited space. The BS-916M is modeled after the American style saw that has been around for decades and carries over many of those saws traits. Like all Baileigh industrial bandsaws the BS-916M is built to last, with a full cast iron bed and fully welded base it can take punishment.

Baileigh BS-260M Horizontal Band Saw

Over the years the BS-260M dual mitering band saw has gone through a number of changes. Once again we have improved it and made it even better. Gone is the day of the DC driver board to adjust the blade speed, now the BS-260M has an AC inverter for even better control and reliability, the best part is that it still is powered by only 220V single phase so it can be used just about anywhere.

Baileigh BSV-16 Vertical Band Saw

The BSV-16 vertical band saw from Baileigh Industrial is the perfect all around vertical bandsaw for any fabrication shop. It has many of the same features found on saws for a lot more money. Although economical the BSV-16 is built rock solid with a fully welded frame and industrial grade components. The BSV-16 will serve any shop faithfully for years to come.

Baileigh BS-350M Horizontal Band Saw

Have a job that requires multiple angles in both left and right direction? If so the BS-350M horizontal band saw might just be the right choice for you. This dual mitering saw has a full cast iron head and bow that swivels 60 degrees right and 45 degrees left. The BS-350M has a 90 degree round capacity of 10-1/2”, making this the perfect saw for any fabrication shop.

Baileigh CS-275M Cold Saw

Have a shop that uses a cold saw on a daily basis? If you do, look at the heavy duty CS-275M manually operated cold saw form Baileigh Industrial. This 11” manual cold saw has the features to take all that you can throw at it and come back for more. With a maximum capacity of 2-3/4” round at 90 degrees, this saw is the perfect choice for jobs like marine rails, playground equipment, hand railing, and various chassis applications.

Baileigh SW-621 Hydraulic Iron Worker

The SW-62 ironworker from Baileigh Industrial is the next step in Baileigh Industrial hydraulic ironworkers. It takes the concept of the SW-50 and adds a little more power or capacity. This 62 ton has industry leading features, such as vertical movement for all stations and oversized work tables. The heavy duty, versatile design of the SW-62 iron worker offers 62 tons of true vertical pressure to each of its five integrated stations, making the SW-62 able to power through most any requirement that may arise.

Baileigh BSV-20VS Vertical Band Saw

The BSV-20VS vertical band saw adds to an already impressive lineup of vertical bandsaws for Baileigh Industrial. Not only does the BSV-20VS bridge the gap between the popular BSV-16 and the huge capacity of the BSV-24, but adds a variable speed pulley. The BSV-20VS vertical band saw is one of the most useful and versatile tools you will ever buy.

Baileigh BS-260SA Horizontal Band Saw

Based on the BS-260M the BS-260SA semi-automatic band saw offers more production and faster turnaround times. The reason that a semi-automatic saw is good for more production runs is that the clamping of the material as well as the raising a lowering of the saw head are automatic and controlled by a foot pedal.

Baileigh BS-350SA Horizontal Band Saw

The BS-350SA semi-automatic band saw is the perfect saw in shops where light production is normal. The BS-350SA runs on 220V single phase power and has a cutting capacity of 10-1/2”, but the best part of the BS-350SA is that is has a full cast iron head and bow can miter 60 degrees right and 45 degrees left.

Baileigh BS-330M Horizontal Band Saw

The BS-330M manual bandsaw from Baileigh Industrial has been a mainstay in our lineup since it was introduced in 2005. This saw will provide years of trouble free use in any environment. The BS-330M has a maximum capacity of 13” OD round, but can cut up to 13" x 18½" rectangle when stood upright.

Baileigh BS-20M Horizontal Band Saw

The BS-20M has extremely heavy-duty cast iron guide arms and wheels. This saw has a great working height of 31" and has a pre-loading and post cutting table that holds the in feed bar and the cut piece, allowing for straighter cuts and longer blade life.

Baileigh BS-20M-DM Horizontal Band Saw

Do you need to replace your current band saw because your shop has out grown it or just looking for a new one to increase production? Then look at the BS-20M-DM dual mitering bandsaw from Baileigh Industrial. The BS-20M-DM has evolved form the original BS-20M to what you see here, an easy to use dual mitering band saw.

Baileigh BS-330SA Horizontal Band Saw

The BS-330SA semi-automatic bandsaw from Baileigh Industrial is based off of the BS-330M that has has been a mainstay in our lineup since it was introduced in 2005. Because of its great history, this saw will provide years of trouble free use in any environment. The BS-330SA uses an industrial grade hydraulic system to clamp the vise, lower the head, and raise the head back up after the cut is done.

Baileigh BS-20SA-DM Horizontal Band Saw

The BS-20SA-DM semi-automatic band saw has now evolved to the model that you see today. Many innovative features are now offered in this great package. The BS-20SA-DM is a dual mitering saw with capabilities to miter 45° left and 60° right with just flick of the wrist and a push or pull of the head.

Baileigh BS-360SA Horizontal Band Saw

If you need to cut steel all day, every day, then the BS-360SA semi-automatic column band saw is for you. The BS-360SA from Baileigh Industrial offers a huge 14” x 22” rectangle capacity. Like all Baileigh Industrial band saws, this single column saw is built with the highest quality components.

Baileigh BS-300A Horizontal Band Saw

If you’re looking for the most productivity out of your band saw, but have limited space, then the BS-300A automatic band saw from Baileigh Industrial is for you. The BS-300A has a robust 10" round and a 10" X 16" rectangular capacity but takes up little room on the shop floor. The BS-300A runs off of 220V three phase power and is that is perfect for any fabricator or production machine shop where large production runs are required.

Baileigh BS-330A Horizontal Band Saw

The BS-330A automatic band saw from Baileigh industrial is just what you have been looking for. The BS-330A automatic band saw has a cutting capacity of 13" OD and 13" X ¾" rectangle and comes fitted as standard with a large 1-1/4" wide blade X .035" thick. This size blade allows for extremely straight cuts, even at full capacity.

Baileigh BS-24SA Horizontal Band Saw

The BS-24SA semi-automatic horizontal band saw has a massive 15" x 24" capacity and utilizes a huge 1-1/2" blade, meaning you will get extremely straight cuts. This semi-automatic band saw has a powerful hydraulic vise, down feed, and bow return. When initiating a cut the vise will close, the machine will start-up and proceed with the cut.

Baileigh BS-20A Horizontal Band Saw

When production from a band saw is the most important thing to a shop, the best place to start is an automatic band saw. The BS-20A from Baileigh Industrial is a fully automatic band saw that can feed a bar or bundle of metal for production sawing requirements.

Baileigh BS-24A Horizontal Band Saw

When looking for a production band saw, one must look at all the ways that the saw can save money over the current unit. Baileigh Industrial took that into consideration when designing the BS-24A automatic band saw. The BS-24A has been constructed using only industrial grade components and materials and will stand up to years of grueling service in any demanding fabrication shop or machine shop.

Baileigh BS-700SA Horizontal Band Saw

The BS-700SA semi-automatic bandsaw from Baileigh Industrial takes them to new heights in industrial band saws. The BS-700SA column style band saw is the perfect saw for those shops that cut large stock all day long and need a bandsaw that won’t quit. With its 27.5” round cutting capacity there isn’t much the BS-700SA won’t cut.

Baileigh BS-800SA Horizontal Band Saw

Baileigh industrial’s BS-800SA semi-automatic band saw is one step above when it comes to craftsmanship and quality. As with all saws from Baileigh Industrial, the BS-800SA semi-automatic column band saw comes with all the important options that a shop could want.

Baileigh BS-1100SA Horizontal Band Saw

Most steel shops need a good quality band saw to do their rough length cutting, but don’t want to be limited on its capacity. That is where Baileigh Industrial’s massive BS-1100SA Semi-Automatic column band saw comes in. It is the largest in the Baileigh Industrial line of horizontal band saws.

Baileigh CM-6 Beveling Machine

Looking to put a really nice chamfered edge on your sheet material without breaking the bank? The CM-6 chamfering machine from Baileigh industrial is perfect for you. Powered by a 1-1/2 hp motor, this 110 volt power bench top machine can put a chamfer up to 6mm onto any edge.

Baileigh CM-10P Beveling Machine

The CM-10P portable beveling machine from Baileigh Industrial ushers in a new era in plate beveling machines. At just under 18 lbs, this light weight portable unit runs on a 1 hp brushless motor that only needs 110 volts to operate. But just because it is light weight doesn’t mean that it can’t produce.

Baileigh CS-225M Cold Saw

The CS-225M cold cut saw from Baileigh industrial is the perfect saw for any shop that has the need for a light production or portable saw that still provides great mill like cuts. Cold cut saws are great for cutting tubing, pipe, angle iron, solids and much more and the CS-225M is no exception.

Baileigh CS-250EU Cold Saw

If you are looking for a good all-around purpose built cold saw that won’t break the bank, look no further than the CS-250EU from Baileigh Industrial. The CS-250EU cold saw is a manually operated 10" circular cold saw that is built for medium grade production seen in most small fabrication shops, but what makes the CS-250EU unique is that is also portable.

Baileigh CS-275EU Cold Saw

Do you do light metal fabrication or chassis building? If so the CS-275EU could be the right saw for you. This 110 volt circular cold saw features an 11” blade that turns at 54 rpm and has a 3-1/4” round capacity at 90 degrees, big enough for just about any chassis project.

Baileigh CS-315EU Cold Saw

The CS-315EU is the flagship of our EU line of cold saws. The CS-315EU is designed to give any shop years of service without breaking the bank. The CS-315EU cold saw is a powerful machine that can cut through solids, tubing, or pipe.

Baileigh CS-350EU Cold Saw

Baileigh Industrials revolutionary new CS-350EU cold saw will change the way you think about cold saws. The CS-350EU is a unique 14” circular cold saw features a true inverter that drives the motor. This inverter allows the blade speed to be adjusted from 24 to 120 RPM. This range of RPM covers most of the cutting application that this cold saw will encounter.

Baileigh CS-350M Cold Saw

If you are looking for a circular cold saw that can handle anything that you can throw at it and have it last for years in any environment, then look at the CS-350M from Baileigh Industrial. Simply put the CS-350M is the best cold saw on the market for the price.

Baileigh CS-350P Cold Saw

Ever dream of having an extra hand to hold large awkward material when trying to close the vise on your cold saw? Well the CS-350P from Baileigh Industrial has taken care of that problem! The CS-350P is based from the CS-350M but adds a pneumatic closing vise to the equation.

Baileigh CS-275SA Cold Saw

The CS-275SA semi-automatic cold saw form Baileigh Industrial is a great production saw for any shop that is cutting thin, medium, or thick walled pipe, tubing, extrusions, or solid bar stock. The CS-275SA has an 11” blade and its design is based off of the CS-275M.

Baileigh CS-355M Cold Saw

Do you have the need to cut a lot of non-ferrous material, such as aluminum or copper? If so then the CS-355M high speed cold saw is a great choice. The CS-355M has a 5.5hp high speed motor that turns 3200 RPM, which is perfect for cutting those soft metals known for gumming up blades.

Baileigh CS-355SA Cold Saw

When cutting non-ferrous material, such as aluminum or copper, you need a high speed cut off saw to ensure a great cut every time. The CS-355SA semi-automatic high speed cut off saw from Baileigh Industrial is a great choice because of the 220 volt three phase, 5.5hp high speed motor that turns 3200 RPM, which is perfect for cutting those soft metals known for gumming up blades.

Baileigh CS-350SA Cold Saw

Do you have the need for more production from your current cut off saw? The CS-350SA from Baileigh industrial might just be the right choice. It is a great production saw for any shop that is cutting thin, medium, or thick walled pipe, tubing, extrusions, or solid bar stock. Designed from the CS-350M, this design has proven itself to be one of the best production saws available.

Baileigh GS-450 Blade Sharpener

Circular Saw Blade Sharpener HSS Precision Sharpening for Circular Saw Blades. The GS-450 is the perfect circular saw blade sharpener allowing you to do your own sharpening economically and quickly right in your own shop. It increases efficiency as cold saw blades can be sharpened to exact specifications without delay.

Baileigh CS-C385SA Cold Saw

The CS-C385SA vertical column cold saw is perfect for those medium duty cutting applications that a great quality cut is important. The CS-C385SA can accept up to a 15-3/4" diameter cold saw blade that will increase the cutting capacity to a robust 4.7”, and also extends the life of the blade.

Baileigh CS-C425SA Cold Saw

The CS-C425SA is a semi-automatic column coldsaw that is perfect for any full-service fabrication or machine shop. The CS-C425SA operates on 220 volts of 3 phase power and accepts a maximum blade of 16" and uses an industrial grade gearbox, drive motor, and hydraulics. The cutting head rides up and down a heavy way track that has been hardened and ground to offer the most accurate cuts in the industry.

Baileigh CS-C485SA Cold Saw

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpms. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use.

Baileigh CS-475AV Cold Saw

When you have a shop that is cutting stock to length all day, every day, it is time to look at the efficiency of the process. That is where the CS-475AV automatic cutoff saw from Baileigh industrial comes in. This fully automatic saw will save time and money over nearly any other way of cutting stock. The CS-475AV is a column style saw that has four blade speeds; 35, 60, 70, and 120.

Baileigh CS-70NC Cold Saw

Do you have a machine shop that needs to cut a lot of solid material to length before machining? If so the CS-70NC tungsten carbide saw is for you. Designed to cut solid high alloy, carbon, non-ferrous, and tool steel grade materials or heavy wall tubing accurately and efficiently, the CS-70NC will take all the abuse that a production environment can throw at it.

Baileigh DBG-106 Disc and Belt Grinder

The DBG-106 combination disc and belt grinder combines an abrasive disc grinder and abrasive belt grinder into one small unit saving a lot of floor space. This grinding machine unit has a powerful 1-1/2 hp motor that requires 110 volts of single phase power, meaning it can work in any fabrication shop setting.

Baileigh DG-500 Disc Grinder

Grinding is an essential part of life in a metal fabrication shop and a large diameter disc grinder is a machine that fits right in. The DG-500 disc grinder from Baileigh Industrial is built to last and uses only the highest manufacturing processes. It features a cast iron base and work table to reduce vibration.

Baileigh BG-248-3 Belt Grinder

The BG-248-3 three wheel belt grinder from Baileigh Industrial is a unique grinder that has a great number of uses in any shop. This 110V grinder has a total of five contact wheels all of varying radii, making it a true radius master. Two of the wheels are fixed and one is adjustable.

Baileigh BG-379 Belt Grinder

This Baileigh Industrial BG-379 belt grinder will be at home in any industrial setting where grinding is part of the daily routine. It has three inches of useful width and is perfect for grinding castings clean, or any metal surface that needs burrs removed.

Baileigh BG-260-3-220 Belt Grinder

The Baileigh Industrial line of grinders just got bigger with the addition of the BG-260-3-220 belt grinder. This three wheel grinder offers all of the versatility a fabrication shop could want. Powered by 220 volt single phase power this inverter driven grinder offers variable speeds ranging from 800 to 8000 fpm, ensuring the correct speed for any application.

Baileigh BG-679 Belt Grinder

The heavy duty BG-679 belt grinder form Baileigh Industrial will make you a believer that bigger is better. The powerful 4hp motor will take all the abuse that you can throw at it because of the 220V three phase power required to run it and the 6” belt allows you to get more work done in the same amount of time.

Baileigh SW-441 Hydraulic Iron Worker

When a small fabricating shop is looking for new ironworker, two needs come to the front; floor space and cost. The SW-44 takes care of both problems. The small foot print allows it to fit just about anywhere and the cost makes it very attractive. Available in two electrical configurations, 220 volt single and three phase, assuring the SW-44 ironworker will working any shop.

Baileigh SW-443 Hydraulic Iron Worker

When a small fabricating shop is looking for new ironworker, two needs come to the front; floor space and cost. The SW-44 takes care of both problems. The small foot print allows it to fit just about anywhere and the cost makes it very attractive. Available in two electrical configurations, 220 volt single and three phase, assuring the SW-44 ironworker will working any shop.

Baileigh SW-503 Hydraulic Iron Worker

Punching, Shearing, Notching, sounds like three machines doesn’t it, but with the SW-50 iron worker from Baileigh Industrial, it is all combined in one small and powerful package.

Baileigh SW-501 Hydraulic Iron Worker

Punching, Shearing, Notching, sounds like three machines doesn’t it, but with the SW-50 iron worker from Baileigh Industrial, it is all combined in one small and powerful package. Baileigh Industrial’s industry leading SW-50 hydraulic iron worker is the perfect addition to any fabrication shop where punching, shearing and notching is required in plate, bar, and various types of angle iron.

Baileigh SW-84 Hydraulic Iron Worker

The SW-84 hydraulic iron worker is a great way to step up to a dual operator ironworker. This machine puts out a little more tonnage on the punch station than the SW-62, a whopping 84 tons to be exact. But the shearing and notching station is where the SW-84 really begins to shine. These stations put out a whopping 110 tons of force, almost double what the largest single operator machine puts out.

Baileigh SW-95 Hydraulic Iron Worker

An ironworker is a staple for any metal working shop, the must have do all tool. And when those shops are looking to increase productivity, they look to a dual operator style machine for the answer. With 95 tons of punching power and 123 tons of shearing and notching pressure, the SW-95 is the perfect option.

Baileigh SW-132 Hydraulic Iron Worker

Baileigh Industrial’s biggest all vertical ironworker is the SW-132. This behemoth has 132 tons of punching and 179 tons of shearing and notching power. It is also a dual operator machine, meaning two workers can work on opposite sides of the machine without a loss in power. To achieve such power the SW-132 boasts a 220 Volt three phase 15 hp motor to power the industrial grade hydraulic system.

Baileigh PL-712VS Lathe

The Baileigh Industrial PL-712VS, variable speed bench top lathe, is the perfect lathe for anyone who is working on small projects, but still wants the accuracy and precision of a larger lathe. The PL-712VS has a 7” swing and 12” between the centers making it one useful tool.

Baileigh PL-1022VS Lathe

Baileigh Industrials PL-1022VS variable speed bench top lathe was developed from the MLD-1030. The PL-1022VS lathe features adjustable RPM from 50-2000 and includes a digital read out for accurate cutting speed. The PL-1022VS also features a powerful 110V 1HP motor that allows you to operate anywhere there is a standard outlet.

Baileigh PL-1236E-DRO Metal Lathe

With the same working base as the versatile PL-1236E lathe, the PL-1236E-DRO take the platform one step further by adding an industrial grade digital readout system for improved accuracy and efficiency. But the PL-1236E-DRO is still a great metal lathe for anyone that is looking an economical lathe that is high in quality and easy to use.

Baileigh PL-1340E Metal Lathe

Baileigh Industrial’s PL-1340E metal working lathe offers the perfect solution for small to medium sized machine shops as well as schools that are looking to upgrade outdated equipment without using up their budget. As with all Baileigh Industrial gear head metal lathes, the PL-1340E comes standard with precision ground and hardened ways offering years of tight tolerances.

Baileigh PL-1440E Metal Lathe

The PL-1440E metalworking lathe from Baileigh Industrial raises the bar on what entry level lathes should be. The PL-1440E is the best choice for small to medium sized shops just getting into the machining aspect of fabrication or schools just looking for a high quality metal lathe at a great price.

Baileigh PL-1340 Metal Lathe

The PL-1340 precision metal lathe from Baileigh Industrial is perfect for those machine shops where precision cannot be compromised. Like all Baileigh Industrial precision lathes, this small yet sturdy lathe is built to exacting specifications using only the best quality components.

Baileigh PL-1440E Metal Lathe

Baileigh Industrial precision metal lathes are the perfect for anyone looking for the best possible fit and finish on their work. Built to withstand years of use in any metal working shop, the PL-1440 features precision ground and hardened ways are further protected by a Turcite-B® coating, which offers years of protection to the ways when under the most grueling turning conditions.

Baileigh PL-1860E Metal Lathe

If you are looking for a large tool room lathe at a good price, take a look at the Baileigh Industrial PL-1860E metal lathe. The PL-1860E has a 18’ swing and 60” bed and operates on 220 volt three phase power. This is the perfect lathe for those small shops or schools that need large capacity but are on a budget.

Baileigh PL-1640 Metal Lathe

The PL-1640 metal working lathe is the perfect combination of size and power. This precision lathe features a 16” swing and 40” between centers and has features that will allow your shop to grow for years.

Baileigh PL-1860 Metal Lathe

The Baileigh Industrial PL-1860 engine lathe is a great investment that out performs other lathes in this class. It is affordable, rugged, reliable and easy to operate. The PL-1860 includes a vast array of features and accessories as standard equipment.

Baileigh PL-2060 Metal Lathe

The PL-2060 gap bend lathe has a 20” swing and 60”s between the centers and is the perfect size for almost any machine shop or fabrication shop where a precision cut is the most important thing. The PL-2060 has a 15 hp motor that is run on220 volts of three phase power. This is more than enough power to handle the most demanding jobs.

Baileigh PL-2080 Metal Lathe

When size of your lathe does matter, look at the PL-2080 precision metal lathe from Baileigh Industrial. This engine lathe has an ample 20" swing over bed with 80" between centers and a powerful 15HP motor. This powerful motor turns the precision gear head with different 12 speeds to a range of rpms from 20 to 1500. Everything about the PL-2080 says power.

Baileigh LF-20 Pittsburgh Machine

HVAC shops demand a lot out of their equipment, so when Baileigh Industrial developed the LF-20 Pittsburgh machine, they knew it had to be able to last. The LF-20 Pittsburgh machine is made from only the highest quality components which include an all steel forming head and hardened with ground shafts.

Baileigh AG-20 Auxiliary Machine

Sheet metal shops are requiring machine to do more and more these days in order to compete with all the prefabricated pieces that are being made. The only problems with those pieces are that in a lot of cases they do not work in existing building where everything is not perfect. In comes the AG-20 roll former form Baileigh Industrial. With its 20 gauge mild steel capacity, this do it all machine is a two sided roll former that has many options available to help any HVAC shop in all its jobs.

Baileigh MSS-14H Shrinker Stretcher

Have you ever had the thought of shrinking anything more than 16 gauge mild steel, but when you try it the machine and jaws just can’t quite cut it. The engineers at Baileigh Industrial had the same problem, this is when the concept for the MSS-14H hydraulic shrinker stretcher came from.

Baileigh BR-16E-36 Bead Roller

The BR-16E-36 bead roller from Baileigh Industrial is a machine that will change the metal forming industry. It has all the best features that fabricators want, as well as some they didn’t know that the needed, until now.

Baileigh PH-19-VS Power Hammer

The PH-19VS takes over where the PH-19 reciprocating power hammer leaves off. By adding an inverter drive to an already potent machine, Baileigh Industrial raised the bar again. When precise speed control is needed for those delicate jobs, the PH-19VS shines. Powered by 110 volts, the PH-19VS allows the operator to control the beats per minute from 0 to 1700.

Baileigh MH-19 Power Hammer

If you are into metal forming and shaping there is currently only one machine that you should have in your shop. That machine is the MH-19 power hammer from Baileigh Industrial. The MH-19 is truly a do it all machine. The MH in MH-19 stands for multi-hammer because if does multiple things, but unlike other combination machines that you see, the MH-19 does them all well.

Baileigh VM-931E-1 Milling Machine

Baileigh Industrial’s VM-931E milling machine is a great vertical mill for those small fabrication shops or educational institutions looking for a good quality vertical mill for a great price. The VM-931E comes with a lot of standard features making it fit right in the Baileigh Industrial line up. The casting of the machine is forged using Meehanite® for extra rigidity meaning, less vibration, offering better tolerances and longer tool life.

Baileigh VM-1039E-1 Milling Machine

The Baileigh Industrial VM-1039E knee mill is the big brother to the VM-931E vertical mill. It carries on the tradition of a well built economical machine that will do everything you could ask and more. This 220 volt single phase machine can be run just about anywhere, making it a good fit for just about any size fabricator or machine shop.

Baileigh VM-942-1 Milling Machine

Baileigh Industrial has a line of vertical milling machines to meet any shops requirements, whether it is price, size, or power. The VM-942 vertical milling machine fits into the price category, but that does not mean that it doesn’t have features to back it up and make it a great value.

Baileigh VM-949-1 Milling Machine

When looking for a conventional style knee milling machine, Baileigh Industrial leads the pack in both quality and standard features. Baileigh Industrials VM-949 milling machine is no exception and is great for any small to medium machine shop or fabrication shop. Like all Baileigh machines, its packed with tons of standard features that are options on most other brands.

Baileigh VM-949-3 Milling Machine

When looking for a conventional style knee milling machine, Baileigh Industrial leads the pack in both quality and standard features. Baileigh Industrials VM-949 milling machine is no exception and is great for any small to medium machine shop or fabrication shop. Like all Baileigh machines, its packed with tons of standard features that are options on most other brands.

Baileigh VM-1054-3 Milling Machine

Table size is very important when deciding which milling machine to buy. The VM-1054 from Baileigh Industrial has a 10” x 54” table that has been hardened, ground, polished, and coated with a special coating called Turcite B to extend life and help to eliminate corrosion.

Baileigh VM-1258-3 Milling Machine

When you need a vertical mill to hold a large job, a small wimpy mill won’t do. You need to step up to the VM-1258 from Baileigh Industrial. The VM-1258 vertical mill features a whopping 12” x 58” table, one of the largest you will find on a manual mill. This large oversized table isn’t just mounted on a wimpy machine to make it look larger. The whole machine has been built to reflect the size and weight that its table brings.

Baileigh SN-F16-HN Notcher

The SN-F16-HN manual corner notcher is a high quality cast iron sheet metal notcher perfect for any garage or sheet metal shop. The cutting angle is fixed at 90 degrees and can notch up to 6" x 6" in one manual stroke. For your safety we have included a blade guard to save your fingers.

Baileigh SN-F11-AN Notcher

The SN-F11-AN pneumatic corner notcher from Baileigh Industrial is the great machine for making perfect corners in sheet metal. The SN-F11-AN corner notcher has an 11 gauge mild steel capacity, so it can make quick work of most any job.

Baileigh TN-300 Pipe Notcher

The TN-300 pipe notcher from Baileigh Industrial is the best production hole saw notcher on the market today. This 110 volt notcher is built using only the best components. The idea of the TN-300 was to get rid of the hand drill and make a better tool for the fabricators. By building a rigid base and tying all the components together, we were able to reduce vibration created from the hole saw itself as it went through the material.

Baileigh TN-200E Pipe Notcher

Do you make 90 degree notches in schedule 40 pipe all day, every day? Then the TN-200E is for you. This electric tube notcher was specifically designed to notch schedule 40 pipe ranging in sizes from ¼” to 2”. This 220 volt single phase machine provides clean and fast notches.

Baileigh TN-400 Notcher

Abrasive style belt notchers have been around for a long time and over that time many have tried, Baileigh Industrial included, coming up with something better. And while the newer machines did do some things better, no one was able to replace the abrasive notcher entirely. They are perfect for thin wall tubing as well as getting the job done fast, really fast with a perfect cope.

Baileigh SN-F09-MS Notcher

The SN-F09-MS sheet metal corner notcher from Baileigh Industrial is the perfect machine for making those perfect corners in that just are not possible with hand tools. This corner notcher has a 9 gauge mild steel capacity, so it can make quick work of most any job. Because the SN-F09-MS has blades that are fixed at 90°, it ensures a perfect notch every time.

Baileigh TN-600 Tube Notcher

If you are looking for a high quality top rated abrasive tube notcher made in the USA. Then look no further, the TN-600 from Baileigh Industrial is just what you are looking for. This abrasive tube notcher is a beast when it comes to chewing up metal. The TN-600 has a powerful 5hp motor that notches at full capacity with ease and only requires 220 volts of single phase power, so it can be used in almost all fabrication shops.

Baileigh SN-F04-MS Notcher

If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. The SN-F04-MS is the great for making perfect corners in metal that are impossible with hand tools. This corner notcher has a 6mm or 4 gauge mild steel capacity, so it can make quick work of most any job.

Baileigh TN-800 Tube and Pipe Notcher

If you are a shop that wants the best in tube and pipe equipment, then you have to look at the TN-800 tube and pipe notcher from Baileigh industrial. This patented (patent No: 6,435,783) design does what no other notch on the market can do; notch tube form 1” to 3” OD without having to change tooling, hole saws or mandrels. The secret is in the eccentric path that the cutter takes as it is notching the tube.

Baileigh SN-V04-MS Notcher

If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. The SN-F04-MS is the great for making perfect corners in metal that are impossible with hand tools. This corner notcher has a 6mm or 4 gauge mild steel capacity, so it can make quick work of most any job.

Baileigh PT-44 Plasma Cutter

The PT-44 CNC plasma table is an industrial grade 4’ x 4’ (working area) plasma cutting table. This quality cnc plasma cutting machine requires 220 Volts of single phase power so it will work at almost any fabrication site throughout North America.

Baileigh PT-44VH Plasma Cutter

The PT-44VH CNC plasma table is an industrial grade 4’ x 4’ (working area) plasma cutting table that comes standard with a variable height control allowing for perfect arc distance at all times even on uneven materials, making each cut perfect, every time. The PT-44VH CNC plasma cutting table requires 220 Volts of single phase power so it will work at almost any fabrication site throughout North America.

Baileigh PT-510HD Plasma Cutter

The PT-510HD CNC plasma table is the perfect choice for any shop looking to cut 5’ X 10’ plates of steel. Constructed from square and rectangle boxed tubing the fully welded, prebuilt box frame, can easily handle the weights of loading the machine at maximum capacity of 1” thick 5’ x 10’ steel plate.

Baileigh PR-413 Plate Roll

Do you currently have a slip roll but are constantly being bogged down when you need to form something a little thicker. That is where the PR-413 roll former comes in. This economical plate roll has the ability to handle up to 13 gauge mild steel over its whole 4’ length.