If you're not already a customer of Betenbender Manufacturing, Inc. we welcome you as a future owner of an American made Betenbender Hydraulic Shear or Hydraulic Press Brake. If you've bought one before, we welcome you back. We are very proud of the fact that our customers come back again and again as they grow and need more equipment.
In addition to a full range of Hydraulic Shears and Hydraulic Press Brakes -- all easy to operate and engineered for simplicity, we have an national and international sales and service team ready to serve you.
Since 1972 we have continually updated our designs and equipment to meet our customers' needs. We always appreciate feedback from our customers.
A precision cut doesn't happen by chance.
It takes a shear that can make a razor-sharp cut time after time. Betenbender overdriven and underdriven Hydraulic Shears are designed to do exactly that. Choose from a family of eight different models:
1/8" or 10 GA), 3/16", 1/4", 3/8", 1/2", 5/8", 3/4", and 1".
Betenbender designs simplicity and safety into its shears-with an advanced hydraulic system and flexible operation. They're easy to operate, easy to maintain and able to a withstand the rigors of today's production demands. A wide range of options are available. Take a look at our Betenbender Hydraulic Shears below!
Need a new machine, or parts or tooling for an existing machine?
Contact Us
Oregon: (503) 581-1516
California: (818) 994-1724
Email: sales@machinetoolsjwk.com
Prices and Specifications are subject to change without notice.
|
Betenbender 2-125 Hydraulic Shear
|
Betenbender 2-125 Hydraulic Shear |
Available from 2 - 16 feet long!
Features•Controls: Push button and switch controls are at your fingertips. The fully guarded, 2-position 110v footswitch lets you interrupt the cutting stroke at any point in its cycle.
•Easy Material Handling: A sturdy backgauge and rake angle adjustment minimizes twist and distortion. This makes it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4ft squaring arm with a recessed scale makes for fast, easy measurement.
•Modified High Carbon, High Chrome Reversible Knives: Provide four separate edges for clean cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.
•Electrical System: Meets NFPA 79 and construction requirements of the ANSI B11.4. All machines have disconnect switches magnetic starters, 110/120v controls, and 208-230/460v 3 phase, others optional.
•Backgauges: A Betenbender Shear is capable of shearing 1/8in (10 GA) material to the following tolerance: Dimension - The width of the off-cut portion of the workpiece is within ±0.005 inch of the backgauge setting.
|
| Anchor Bolt Dimension (in.) | 33 | | Knife Length (in.) | 28 | | Strokes per Minute (in.) | 35 | | Shipping Weight | 3,400 lbs. (base)
|
|  |
|
Betenbender 4-1875 Hydraulic Shear
|
Betenbender 4-1875 Hydraulic Shear |
Available from 2 - 16 feet long!
Features•Controls: Push button and switch controls are at your fingertips. The fully guarded, 2-position 110v footswitch lets you interrupt the cutting stroke at any point in its cycle.
•Easy Material Handling: A sturdy backgauge and rake angle adjustment minimizes twist and distortion. This makes it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4ft squaring arm with a recessed scale makes for fast, easy measurement.
•Modified High Carbon, High Chrome Reversible Knives: Provide four separate edges for clean cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.
•Electrical System: Meets NFPA 79 and construction requirements of the ANSI B11.4. All machines have disconnect switches magnetic starters, 110/120v controls, and 208-230/460v 3 phase, others optional.
•Backgauges: A Betenbender Shear is capable of shearing 1/8in (10 GA) material to the following tolerance: Dimension - The width of the off-cut portion of the workpiece is within ±0.005 inch of the backgauge setting.
|
| Anchor Bolt Dimension (in.) | 52 | | Knife Length (in.) | 52 | | Strokes per Minute (in.) | 35 | | Shipping Weight | 4,500 lbs. (base)
|
| |
|
Betenbender 6-250LPE Hydraulic Shear
|
Betenbender 6-250LPE Hydraulic Shear |
Available from 4 - 16 feet long!
Features•Controls: Push button and switch controls are at your fingertips. The fully guarded, 2-position 110v footswitch lets you interrupt the cutting stroke at any point in its cycle.
•Easy Material Handling: A sturdy backgauge and rake angle adjustment minimizes twist and distortion. This makes it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4ft squaring arm with a recessed scale makes for fast, easy measurement.
•Modified High Carbon, High Chrome Reversible Knives: Provide four separate edges for clean cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.
•Electrical System: Meets NFPA 79 and construction requirements of the ANSI B11.4. All machines have disconnect switches magnetic starters, 110/120v controls, and 208-230/460v 3 phase, others optional.
•Backgauges: A Betenbender Shear is capable of shearing 1/8in (10 GA) material to the following tolerance: Dimension - The width of the off-cut portion of the workpiece is within ±0.005 inch of the backgauge setting.
|
| Anchor Bolt Dimension (in.) | 76 | | Knife Length (in.) | 76 | | Strokes per Minute (in.) | 35 | | Shipping Weight | 7,000 lbs. (base)
|
| |
|
|
Betenbender 10-500 Hydraulic Shear
|
Betenbender 10-500 Hydraulic Shear |
Available from 4 - 12 feet long!
Features•Controls: Push button and switch controls are at your fingertips. The fully guarded, 2-position 110v footswitch lets you interrupt the cutting stroke at any point in its cycle.
•Easy Material Handling: A sturdy backgauge and rake angle adjustment minimizes twist and distortion. This makes it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4ft squaring arm with a recessed scale makes for fast, easy measurement.
•Modified High Carbon, High Chrome Reversible Knives: Provide four separate edges for clean cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.
•Electrical System: Meets NFPA 79 and construction requirements of the ANSI B11.4. All machines have disconnect switches magnetic starters, 110/120v controls, and 208-230/460v 3 phase, others optional.
•Backgauges: A Betenbender Shear is capable of shearing 1/8in (10 GA) material to the following tolerance: Dimension - The width of the off-cut portion of the workpiece is within ±0.005 inch of the backgauge setting.
|
| Anchor Bolt Dimension (in.) | 128 | | Knife Length (in.) | 124 | | Strokes per Minute (in.) | 9 | | Shipping Weight | 28,000 lbs. (base)
|
| |
|
Betenbender 12-750 Hydraulic Shear
|
Betenbender 12-750 Hydraulic Shear |
Available from 4 - 12 feet long!
Features•Controls: Push button and switch controls are at your fingertips. The fully guarded, 2-position 110v footswitch lets you interrupt the cutting stroke at any point in its cycle.
•Easy Material Handling: A sturdy backgauge and rake angle adjustment minimizes twist and distortion. This makes it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4ft squaring arm with a recessed scale makes for fast, easy measurement.
•Modified High Carbon, High Chrome Reversible Knives: Provide four separate edges for clean cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.
•Electrical System: Meets NFPA 79 and construction requirements of the ANSI B11.4. All machines have disconnect switches magnetic starters, 110/120v controls, and 208-230/460v 3 phase, others optional.
•Backgauges: A Betenbender Shear is capable of shearing 1/8in (10 GA) material to the following tolerance: Dimension - The width of the off-cut portion of the workpiece is within ±0.005 inch of the backgauge setting.
|
| Anchor Bolt Dimension (in.) | 152 | | Knife Length (in.) | 148 | | Strokes per Minute (in.) | 6 | | Shipping Weight | 35,000 lbs.
|
| |
|
