Di-Acro Model 6 Tube and Pipe Bender

Model 6 Setup - For bending TUBING, ANGLE AND CHANNEL. Includes clamps and pressure roller assembly as basic tooling for tube bending. Standard Grooved Radius Collar - For bending round tubing. Used with Clamp Block and Follow Block. When bending materials of open cross section such as tubing, channel, angle and extrusions, the bending form should exactly fit the contour of the material to provide support during the forming operation. This is also true of the Clamp Block and Pressure Tool as only completely confining the material can a good bend be obtained. Special Crush Bend Tooling for Round and Square Tubing - designed for both 6 POWER and 8 POWER benders. Crush bend tooling is used primarily for bending thin wall tubing to a tight radius. If it is not necessary for the formed section to retain its original shape, such as in structural components, the tubing can be uniformly indented with this tooling. The "crush" on the inside radius adds additional strength to the bend, as well as allowing a tight radius with controlled distortion in the bend area.

Di-Acro Model 8 Tube and Pipe Bender

Model 8 Setup - For bending SOLID STOCK. Especially suitable for bending eyebolts with centered or off-centered eye bends in one operation. Built Up Forming Nose - Forms wider materials with special height or stacked collars. •Radius Block - For forming solid materials to a tight radius. Requires a standard locking pin to hold material. •Radius Collar - Forms solid stock to larger radii. Requires standard locking pin to hold material. •Forming Roller - Replaces forming nose to eliminate part marking. •Radius Pins - Shoulder Radius Pin is used for forming solid materials to a larger radius. A Quill Radius pin is used for forming light material to a tight radius. Both pins require a standard locking pin to hold material in place.

Di-Acro Model 1 Tube and Pipe Bender

The Di-Acro Bender is a multi-purpose machine that quickly adapts to a variety of bending operations, whether prototype, production or for duplicating parts with simple, compound or reverse bends in many materials — angle, channel, tubing, rod wire, strip stock, ect. They are die substitutes that also produce work not obtainable with dies. The Hand Bender is available in five models with capabilities of bending up to 1in round mild steel bar with a radius of 0 - 12in. The Model 4 Bender features a selectable ratchet drive mechanism for increased power when working with heavier materials.

Di-Acro Model 1A Tube and Pipe Bender

The Di-Acro Bender is a multi-purpose machine that quickly adapts to a variety of bending operations, whether prototype, production or for duplicating parts with simple, compound or reverse bends in many materials — angle, channel, tubing, rod wire, strip stock, ect. They are die substitutes that also produce work not obtainable with dies. The Hand Bender is available in five models with capabilities of bending up to 1in round mild steel bar with a radius of 0 - 12in. The Model 4 Bender features a selectable ratchet drive mechanism for increased power when working with heavier materials.

Di-Acro Model 2 Tube and Pipe Bender

The Di-Acro Bender is a multi-purpose machine that quickly adapts to a variety of bending operations, whether prototype, production or for duplicating parts with simple, compound or reverse bends in many materials — angle, channel, tubing, rod wire, strip stock, ect. They are die substitutes that also produce work not obtainable with dies. The Hand Bender is available in five models with capabilities of bending up to 1in round mild steel bar with a radius of 0 - 12in. The Model 4 Bender features a selectable ratchet drive mechanism for increased power when working with heavier materials.

Di-Acro Model 3 Tube and Pipe Bender

The Di-Acro Bender is a multi-purpose machine that quickly adapts to a variety of bending operations, whether prototype, production or for duplicating parts with simple, compound or reverse bends in many materials — angle, channel, tubing, rod wire, strip stock, ect. They are die substitutes that also produce work not obtainable with dies. The Hand Bender is available in five models with capabilities of bending up to 1in round mild steel bar with a radius of 0 - 12in. The Model 4 Bender features a selectable ratchet drive mechanism for increased power when working with heavier materials.

Di-Acro Model 4 Tube and Pipe Bender

The Di-Acro Bender is a multi-purpose machine that quickly adapts to a variety of bending operations, whether prototype, production or for duplicating parts with simple, compound or reverse bends in many materials — angle, channel, tubing, rod wire, strip stock, ect. They are die substitutes that also produce work not obtainable with dies. The Hand Bender is available in five models with capabilities of bending up to 1in round mild steel bar with a radius of 0 - 12in. The Model 4 Bender features a selectable ratchet drive mechanism for increased power when working with heavier materials.