Flagler 24 Junior Pittsburgh Machine

Ideal for small to medium sized sheet metal contractors or jobsite manufacturing. Shown with optional Flanging Attachment and Floor Stand

Flagler 22 Portable Pittsburgh Machine

Ideal for small to medium sized sheet metal contractors or jobsite manufacturing. Shown with optional Flanging Attachment and Floor Stand

Flagler 20 Standard Pittsburgh Machine

Ideal for small to medium sized sheet metal contractors or for fitting departments of large manufactures. This machine features hardened feed gauges and 3 piece shaft/roll/gear design.

Flagler 20 High Speed Pittsburgh Machine

Ideal for medium to large sized sheet metal contractors. Built on the same frame as the Flagler 16 Ga. Pittsburgh machine, makes this the most robust 20 Ga. Pittsburgh on the market. This machine features hardened feed gauges and 3 piece shaft/roll/gear design. Shown with Optional Short Parts Feeder

Flagler 20-HS7 Pittsburgh Machine

This Machine is the same as the 6 station High Speed with the exception of it has an additional station for more available auxiliary tooling

Flagler 18-HD Pittsburgh Machine

This machine is designed for heavy gauge Pittsburgh locks. Complete with hardened feed gauge, 3 piece roll/shaft/gear construction, and calibrated dial for 18-22 Ga. mild steel.

Flagler 16-HD Pittsburgh Machine

This machine is designed for heavy gauge Pittsburgh locks. Complete with hardened feed gauge, 3 piece roll/shaft/gear construction, and calibrated dial for 16-20 Ga. mild steel.

Flagler H-2 1/2-7 Pittsburgh Machine

This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.

Flagler H-2 1/2-10 Pittsburgh Machine

This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.

Flagler H-257 Pittsburgh Machine

This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below. This machine is recommended when forming on prepainted stock or special profiles due to the individual micrometer adjustments on each of the top shafts. There are (2) sets of extended shafts to form any of the profiles for the H-2 1/2-7 model or specially designed tooling.

Flagler H-2510 Pittsburgh Machine

This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below. This machine is recommended when forming on prepainted stock or special profiles due to the individual micrometer adjustments on each of the top shafts. There are (2) sets of extended shafts to form any of the profiles for the H-2 1/2-7 model or specially designed tooling.

Flagler HS-20 Button Lock

Flagler 20-PF Power Flanger

Stand alone flanger to allow shops to free up their flanging attachment on their Pittsburgh machine, complete with flange follower.

Flagler 18-PF Power Flanger

Ideal for larger fitting work. This machine is built with a heavy duty cast iron gear housing with oil bath.

Flagler 16-PF Power Flanger

Ideal for larger fitting work. This machine is built with a heavy duty cast iron gear housing with oil bath.

Flagler 20-BPF Button Punch Flanger

For manufacturing fittings using the button lock seam rather than Pittsburgh 2 step operation, first the flange is formed then the buttons are punched. This machine is built with a heavy duty cast iron gear housing with oil bath and complete with Flange Follower.

Flagler DFM Duct Flange Machine

Flagler HSQ Cleat Machine

Standard with re info rced "S" Cleat & 1 1/8" Drive Cleat Tooling in the center position. There are (2) sets of extended shafts for auxiliary rolls

Flagler S Cleat Machine

Standard with Boot Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling.

Flagler Mini Cleat Machine

Standard with 1/2" Standing “S” Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling.

Flagler DC Cleat Machine

Standard with 1 1/8” Drive Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling.

Flagler 1-S Cleat Machine

Standard with 1” Standing “S” Cleat Rolls in the center position. There are (2) sets of extended shafts for optional tooling

Flagler EC-30 Cleat Machine

The Flagler Open Throat Electric Cleatfolders are the fastest in the industry. Each model comes equipped with micro PLC controller, guard safety switch, and hardened bending bar.

Flagler EC-36 Cleat Machine

The Flagler Open Throat Electric Cleatfolders are the fastest in the industry. Each model comes equipped with micro PLC controller, guard safety switch, and hardened bending bar.

Flagler AC-24 Cleat Machine

The Flagler Open Throat Pneumatic Cleatfolders come complete with 6 gallon surge tank so they can be operated from a standard 3/8” compressed air line. Each model comes equipped with micro PLC controller, guard safety switch, and hardened bending bar.

Flagler AC-30 Cleat Machine

The Flagler Open Throat Pneumatic Cleatfolders come complete with 6 gallon surge tank so they can be operated from a standard 3/8” compressed air line. Each model comes equipped with micro PLC controller, guard safety switch, and hardened bending bar.

Flagler DTH Hemmer

Rollform your drive turn hems on this machine after notching and prior to bending into L or full wrap sections. Simple select the sections to be hemmed with the selector switch and run through. The machine will hem the 1st and 3rd quadrants or the 2nd and 4th quadrants.

Flagler CM-1 Collar Machine

This machine will form the Spin Collar pocket, coil, crimp and bead. Complete with hardened outrigger guide.

Flagler CM-2 Collar Machine

This machine is used form forming a safety edge hem and coil the blanks commonly used for boots and fittings.

Flagler GS-336 Gang Slitter

The Flagler Sheet Gang Slitters comes standard with 3 pair of slitter knives. This unit is available in 3 models - 36", 48" and 60" widths. A fully adjustable feed gauge allows for the slitting of any increments down to and including a 4" wide starting blank. These Flagler slitters will slit bronze, aluminum, brass, and other materials as well as conventional galvanized sheets. All blade assemblies are fully adjustable over width of the machine. Micrometer adjustments on the main slitting arbor for fast, positive adjustment.

Flagler GS-348 Gang Slitter

The Flagler Sheet Gang Slitters comes standard with 3 pair of slitter knives. This unit is available in 3 models - 36", 48" and 60" widths. A fully adjustable feed gauge allows for the slitting of any increments down to and including a 4" wide starting blank. These Flagler slitters will slit bronze, aluminum, brass, and other materials as well as conventional galvanized sheets. All blade assemblies are fully adjustable over width of the machine. Micrometer adjustments on the main slitting arbor for fast, positive adjustment.

Flagler GS-360 Gang Slitter

The Flagler Sheet Gang Slitters comes standard with 3 pair of slitter knives. This unit is available in 3 models - 36", 48" and 60" widths. A fully adjustable feed gauge allows for the slitting of any increments down to and including a 4" wide starting blank. These Flagler slitters will slit bronze, aluminum, brass, and other materials as well as conventional galvanized sheets. All blade assemblies are fully adjustable over width of the machine. Micrometer adjustments on the main slitting arbor for fast, positive adjustment.

Flagler SGB Gang Slitter

The Flagler Sheet Beader. This unit is designed for forming 5 beads on a 60” wide sheet at 12” increments per standards. A fully adjustable feed gauge. Micrometer adjustments on the main arbors for fast, positive adjustment.

Flagler L-2510 Roll Former

Flagler L-520 Roll Former

Flagler L-46 Roll Former

Flagler L-38-OB Roll Former

Flagler U-58-R Roll Former

Flagler L-610-OB-TD Roll Former

Flagler L-257-OB Roll Former

Flagler U46 Roll Former

Flagler L-412 Roll Former

Flagler L-510 Roll Former

Flagler L-257 Roll Former

Flagler U-312 Roll Former

Flagler L-38-OB Roll Former

Flagler L-412-OB Roll Former

Flagler U-2510-Q Roll Former

Flagler L-310-OB Roll Former

Flagler H-4514 Roll Former

Flagler DH-2510 Dual Head Roll Former

Flagler DH-48 Dual Head Roll Former

Panel width of 6”-48” with Servo Controlled Go-To panel width control with touch screen.

Flagler DH-257-R Dual Head Roll Former

Panel width of 6”-32” with integrated hydraulic Coiling Attachment. Touch Screen Controller

Flagler DH-257 Dual Head Roll Former

Panel width of 6”-36” with automatic bearing lubrication system. LED panel width indicator

Flagler DH-412-DF1 Dual Head Roll Former

Center Line Based Traverse Pneumatically controlled exit end Beader

Flagler DH-2510 Dual Head Roll Former

Dual Drive System

Flagler DH-614 Dual Head Roll Former

Flagler DH-58 Dual Head Roll Former

Flagler L310 Roll Former

Flying Cut-Off