Max 20GH Drill Press

Features: •Heavy duty design allows a variety of precision drilling applications. •Built-in spindle lock. •Head tilts left or right. •Easy table adjustment. •Large production table and T-slotted base. •Easy-to-read internal depth gauge.

Max 20VS Drill Press

Features: •Heavy duty head. All bearing surfaces are precision bored simultaneously for exact alignment. Bottom spindle bearings are double row which absorbs both radial and thrust loads. •Long spindle stroke extended to 6.5in. •Head swivel in 360° •Table swivel in 360° by ball bearings •Large production table and base for stability and reduced vibration. •Variable spindle speeds for all materials. •Spindle speeds are easily changed by means of a front mounted dial. •Long lasting hardened Chrome Column •2HP motor standard.

Max CH-16NF Drill Press

Features: •Spindle is supported by high quality ball bearings. •Cast iron pulleys reduce vibrations. •Comes with non-slip rubber feed handles. •45° tilting table for angular drilling. •Locking depth stop for accurate blind hole drilling. •5/8 drill chuck and key included. •16-speed. •On-off switch for power and light located in front of the machine.

Max CH-18F Drill Press

Features: •Spindle is supported by high quality ball bearings. •Cast iron pulleys reduce vibrations. •Comes with non-slip rubber feed handles. •45° tilting table for angular drilling. •Locking depth stop for accurate blind hole drilling. •5/8 drill chuck and key included. •16-speed. •On-off switch for power and light located in front of the machine.

Max CH-25 Drill Press

Features: •1 1/2HP 1PH motor provides ample power for production drilling. •Quill has an internal MT#3 to accept tapered drill. •Press accessories. •Production sized tilting table with coolant trough and clamping slots. •Positive depth stop for quick and easy adjustment. •3/4 drill chuck and key included. •12-speed.

Max OVS Spindle Sander

Constructed for rugged use, the 24in square table is mounted on large trunnions and can be tilted up or down by a convenient handwheel through bevel and worm gears. Ten spindles, ranging in size from 1/4in to 4in in diameter are standard equipment. The quill runs in precision ball bearings, oscillation by a heavy-duty worm and gear mechanism running in a bath of oil. A standard 1 HP motor is available 110V, 220V or 208V single phase and 220V, 208V or 440V, three phase. The motor drives through a flexible coupling and can be installed or removed without disturbing the drive mechanism of the spindle sander.

Max OVS-JM Spindle Sander

•10 spindles standard •Rubber drums standard •Precision ground table •3 throat plates •Heavy duty steel frame •Tilting table •Easily interchangeable spindles •Heavy gauge steel frame

Max Econostroke Stroke Sander

The Econostroke is specifically designed to deliver efficient, precise stroke and belt sanding at an economical price. Its rugged construction features a torsion resistant sanding table to handle bulky, oversize pieces. Geared table movement provides fast, accurate adjustment up to 24 inches. For added versatility, the entire belt can be rotated 90° to perform edge sanding. Multiple ball bearings on the table guide and pad carriage contribute to the smooth operation necessary to achieve quality sanding. The Econostroke also features magnetic controls with undervoltage, overload protection, a powerful motor and 3in dust chutes at each belt end. Let Econostrokes high performance low price start providing you sanding dividends today.